Not a member yet? Why not Sign up today
Create an account  

Comment joindre
Bienvenu sur le forum de la guild Top1France! Pour joindre la guild, vous devez vous créer un compte sur le forum en utilisant votre pseudo dans le jeu. Vous devez ensuite avoir un compte au niveau 30 minimum dans le bon serveur Hero Wars (136 idol of Charm). Postez une présentation sur le forum et nous vous contacterons dès qu'une place se libère. Quand une place se libèrera, vous aurez 24h après qu'un membre de l'équipe vous contacte (par message privé et en réponse à votre sujet de présentation) pour faire votre demande ou nous procèderons au suivant sur la liste. Nous donnons priorité à ceux avec un compte élever. Bonne chance à tous! En attendant d'être admis, participez à la vie communautaire et faites-vous connaitre!

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
rotary vane vacuum pump temperature requirements

#1
rotary vane vacuum pump temperature requirements

The working principle of rotary vane vacuum pump is known to all. But the temperature of rotary vane vacuum pump is too high. It refers to the maximum oil temperature measured near the low-level exhaust valve that exceeds the value specified in the instruction manual. Rotary vane vacuum pump is generally used at room temperature no less than 5 and relative temperature no higher than 90%. The gas enters the high vacuum chamber from the intake nozzle. At first, the high and low vacuum chambers are filled with atmosphere, and both exhaust valves are opened for exhaust.

With the progress of air pumping, the air pressure decreases (i.e. the vacuum degree increases). The pressure in the high vacuum chamber is not enough to push the exhaust valve open. The gas enters the low vacuum chamber through the middle partition plate. At this time, the pressure is not enough to open the exhaust valve. However, there is a certain amount of oil entering the low vacuum chamber to help push open the exhaust valve, and the gas will be discharged. The discharged gas is mixed with oil particles, which are filtered by the oil screen to separate the oil. Only the gas is discharged from the pump.

The oil in the oil seal chamber of the rotary vane vacuum pump is supplied by the oil pool a through the hole on the front plate. The oil in the low vacuum chamber is supplied by the oil pool a through the holes in the rear end plate. The oil in the high vacuum chamber is circularly supplied by the hole in the middle diaphragm. The oil in the oil seal chamber of the rotary vane vacuum pump is supplied by the oil pool a through the hole on the front plate. The oil in the low vacuum chamber is supplied by the oil pool a through the holes in the rear end plate. The oil in the high vacuum chamber is circularly supplied by the hole in the middle diaphragm. The seal of the front and rear end covers of the rotary vane vacuum pump is sealed by the oil pool B on the upper part of the pump body and flowing into the oil groove through the hole in the end face chamber of the pump body.


Water Ring Vacuum Pump

Dry Scroll Vacuum Pump

industrial vacuum pumps,vacuum furnaces
Reply


Forum Jump:


Users browsing this thread:
1 Guest(s)